Features and Benefits
recognizes and manages active gauges automatically
Six modifiable relay set-points for the user
Status of the relay is displayed
Each gauge channel has a single buffered analog output set to 0–10 V.
Common gases (N2, He, Ar, CO2, Kr, and Ne) can be read at direct pressure without the need for conversion factors.
Options for user-configurable displays include: the ability to see one, three, or six channels at once; the option to cycle through gauge order selection; Each gauge has a four-character alphanumeric name assigned by the display.
Units of display: mbar, Torr, Pa, or Volts
Specifications
General Product Information
| Weight |
1.70 kg |
| Power Supply Phase |
1-Ph |
| Supply Voltage |
1Ph 90-264V 50/60Hz |
| Dimension Length |
0.247 m |
| IP Rating |
IP20 |
| Supply Frequency |
50 Hz
60 Hz
|
| Dimension Height |
0.129 m |
| Dimension Width |
0.106 m |
| Connection Power |
IEC EN60320 C14 – Male (for C13 plug on mains cable) |
| Measurement Channels |
3 Gauges |
| Available Units of Measurements |
mbar |
Environmental Conditions
| Temperature Ambient Operation Max |
313.15 K |
| Temperature Ambient Operation Min. |
273.15 K |
| Temperature Ambient Storage Min. |
243.15 K |
| Temperature Ambient Storage Max. |
343.15 K |
Operation Conditions – Limitations
Connectivity – Communication Interface
| Communication Interfaces Customer |
RS232 (serial)
RS485 (serial)
|
| Connection electrical comms interface connector |
RJ45 (FCC 68) – Female |
| Communication Interface Protocol |
DX protocol |
Performance Data
| Pressure Displayed Max. |
2.000 × 10⁵ Pa |
Variants
TIC – Instrument Controller 3 Head RS232
TIC – Instrument Controller 3 Head RS232 – factory calibration
TIC – Instrument Controller 6 head RS232
TIC – Instrument Controller 6 head RS232 – factory calibration
TIC – Instrument Controller 6 head Capman
TIC – Instrument Controller 6 head Capman – factory calibration
